Tipper Trucks – 2t

HIRE THIS ITEM

Master Hire tipper trucks are available for hire in a range of options. With an air-conditioned cabin, removable tow bar and auto release two-way tailgate, you’ll find any of our tipper trucks ensure you complete your job with ease.

Powered by reliable diesel engines, our Isuzu and Hino 300 series tipper trucks have a manual transmission, come in four-wheel and rear-wheel drive options and are equipped with a flashing light, AM/FM stereo and UHF radio. When you choose Master Hire, you’ll find the right truck to handle just about any load you can throw at it. Gross vehicle mass (GVM) ranges from 4,500kg-6,000kg with tipper tray body volumes of 2.0m3. Tray measurements for our range of 2T Tipper Trucks are approximately 3040mm long, 2080mm wide and 360mm deep. This is a guide only and these measurements do vary between models.

For more details on the range of tipper trucks available, give the team at Master Hire a call on 1300 107 107.

Operational requirements

  • Valid Australian drivers’ licence required to operate our 2 tonne tipper trucks
  • Valid Australian Light Rigid (LR) licence is required for the 3 tonne dual cab tipper
  • Driver must be over 25 years old

Ease of use

Master Hire 2 tonne tipper trucks only require a standard licence to drive making them easy to use. Our 3 tonne tipper trucks require a Light Rigid (LR) licence to drive. For added convenience and increased efficiency, the 20 second tipper tray raise and lower time ensures you get the job done fast!

Product Training and Guidance

If you require additional guidance to ensure you can operate all of the features of the tipper trucks confidently, we offer a free customer hand over which also includes a thorough walk-through and any necessary training.

Delivery and Pick Up

Master Hire offers convenient delivery and pick up options. Speak to our team for delivery rates which may vary depending on location. For more information, or to enquire about our hire rates, contact Master Hire 1300 107 107.

For your safety, convenience and WHS obligations, user manuals and hazard assessments are available for a range of equipment.

Tilt Tray Truck Icon

This item can be transported on the back of a tilt tray truck.

Product Documents

Hazard Assessment

SKU: TIPPER Categories: ,

These specifications are a guide only based on the supplier’s specifications.

Isuzu NPR 275 (Down Rated) Fuso CANTER 615
Engine Type Diesel Diesel
Transmission Manual Automatic
Req Licence Car Licence Car License
Cabin Single Cab Single (Wide Cab)
GVM 4495kg 6000kg
TARE 2515kg 2270kg
GCM 7000kg 9500kg
Overall Height 2260mm 2180mm
Overall Length 5985mm 5935mm
Overall Width 2080mm 1995mm
Tipper Body Volume 2.0m3 2.0m3
Drive Rear Wheel Drive Rear Wheel Drive